Since there are many special devices for fishing net machines which may be required
depending on the type & pitch of machines and also twine & mesh sizes to be produced,
Please allow us to recommend to choose necessary ones you want to take from the followings:

1. Large mesh making device by the chain system
   
   By using this device, larger meshes than the sizes described in the catalogue
   are produced as follows.
   
   

   CAS	330 mm
   CAD
   CAU
   LAS	400 mm
   LAD
   LAU
   JAD	450 mm
   JAU
   JAS	600 mm
   TXS
   HZS	Unlimited

   　(Please consult TOYO if a larger size than the above is required for your application.)

2. Extra-large mesh making device by geared motor system
   
   This device, which drives the net forwarding roll by the servo-motor, is most suitable for
   making an extra large mesh, such as the wing of a trawl net, and can be installed
   on the Models JAS, JAD and HZS machines. The maximum is unlimited.
   

3. Net delivery device with the steel roll
   
   This steel roll is used to convey the netting out of the machine after the resin treatment.
   By using this device, the netting which is still wet as a result of resin treatment is dried
   in the air.
   

4. Net take-up device by geared motor system
   
   Driven by the geared motor, the take-up roll winds up the netting automatically.
   The dancing roll installed between the delivery roll and the take-up roll functions
   to maintain the netting tension at a constant level. This tension roll plays a vital role
   in producing uniform meshes.
   (Net take-up device by the chain system is available for the model CAS & CAD.)

5. Automatic vibration-proof device
   
   This is the device to eliminate a vibration of the knot tightening roll which drops of
   its own accord. Thanks to the mechanism which interlocks to the drop speed of the knot
   tightening roll, this enables the roll to stop vibrating properly even though the drop speed
   would have been changed due to the change of the circumstances
   such as a temperature, humidity and so forth in the factory.
   

6. Totally-enclosed safety guards at both ends
   
   The totally-enclosed safety guards have doors on interlocking system. The guards
   which are designed to meet the safety regulations of any country, will be supplied.
   Safety information should be provided to TOYO from the purchaser.
   

7. Selvage threading device

8. Net splitting device

9. Large selvage making device

10. Selvage gathering device

11. Twist-proof mechanism

12. Resin device